SkipCalls
Nex-Tech Wireless logo

Updated

Nex-Tech Wireless Call Forwarding Codes

Quick answer: to forward all Nex-Tech Wireless calls, dial **21*number# and press Call. To turn call forwarding off, dial ##21#. To check whether forwarding is on, dial *#21#.

If you use Nex-Tech Wireless, you can use call forwarding to send incoming calls to SkipCalls, an AI answering service that answers 24/7. It’s a simple carrier feature that lets your phone ring as usual while SkipCalls handles calls you can’t take. Most setups take under 5 minutes, and you can disable forwarding whenever you want.

All Nex-Tech Wireless call forwarding codes

Open your phone's dialer, enter the code, and press Call. Replace number with the 10-digit number you want calls sent to — no spaces or dashes.

Nex-Tech Wireless call forwarding codes
Forward typeTurn onTurn offCheck status
All calls
Every incoming call is forwarded
**21*number###21#*#21#
When busy
Forwards when you're on another call
**67*number###67#*#67#
No answer
Forwards if you don't pick up within a few rings
**61*number###61#*#61#

Generate your exact Nex-Tech Wireless code

Enter your SkipCalls number. It stays in this browser and is not submitted.

Activate forwarding

Enter a complete phone number

Turn forwarding off

##61#

How to set up call forwarding on Nex-Tech Wireless

  1. 1

    Open the Phone app on your Nex-Tech Wireless phone. On a landline, lift the handset and wait for a dial tone.

  2. 2

    Dial **21*number#, replacing "number" with the 10-digit number you want calls sent to. No spaces or dashes.

  3. 3

    Press Call. Wait for the confirmation message or tone, then hang up.

  4. 4

    Dial *#21# to confirm forwarding is on, or call your Nex-Tech Wireless number from another phone.

How to turn off Nex-Tech Wireless call forwarding

Dial the code for the forwarding you want to stop and press Call. Calls ring your Nex-Tech Wireless phone again right away.

  • Stop forwarding all calls##21#
  • Stop busy forwarding##67#
  • Stop no-answer forwarding##61#
  • Cancel every forwarding rule at once##002#

Turn on Nex-Tech Wireless call forwarding in phone settings

Prefer menus over dial codes? Both phones support forwarding on Nex-Tech Wireless without dialing anything.

iPhone

  1. Open Settings → Apps → Phone (older iOS: Settings → Phone).
  2. Tap Call Forwarding and switch it on.
  3. Tap Forward To, enter the 10-digit number, and go back to save.

iPhone settings only forward all calls. Use the dial codes above for busy or no-answer forwarding.

Android (Samsung, Pixel)

  1. Open the Phone app → ⋮ → Settings.
  2. Samsung: Supplementary services → Call forwarding. Pixel: Calls or Calling accounts → Call forwarding.
  3. Pick always, when busy, when unanswered, or when unreachable, enter the number, and tap Enable.

Nex-Tech Wireless call forwarding not working?

  • •Confirm which forwarding type you’re trying to use (Always vs. Busy/No Answer/Unreachable). Some Nex-Tech Wireless plans or devices support conditional forwarding differently.
  • •If dial codes don’t work, try from the phone app’s keypad (not Contacts) and press Call, then wait for a confirmation tone/message before hanging up.
  • •Check whether Wi‑Fi Calling or a strong LTE/5G signal is active—poor coverage can prevent the network from accepting forwarding changes on regional carriers like Nex-Tech Wireless.
  • •If you’re forwarding only when you don’t answer, increase your ring time (where supported) so calls don’t forward too quickly to SkipCalls.
  • •If you recently switched phones or SIM/eSIM, re-enter forwarding settings—network-side forwarding can reset after number changes, porting, or device provisioning updates with Nex-Tech Wireless.

Nex-Tech Wireless call forwarding FAQ

Can I forward Nex-Tech Wireless calls to SkipCalls (an AI answering service)?
Yes. Nex-Tech Wireless supports call forwarding via carrier features, so you can route your calls to a SkipCalls number and have the AI answer 24/7.
Will call forwarding work on any Nex-Tech Wireless phone (iPhone and Android)?
In most cases, yes. You can set it up either with dial codes from the keypad or through your phone’s built-in call forwarding settings, depending on your device and plan.
Does Nex-Tech Wireless charge for call forwarding?
Call forwarding is typically treated like an outbound forwarded call by many carriers, which may affect minutes or usage depending on your plan. For exact details, check your Nex-Tech Wireless plan terms before enabling forwarding.
Can I forward only missed calls (busy/no answer) instead of all calls?
Usually, yes—this is often called conditional call forwarding. Availability can vary by device and Nex-Tech Wireless account features, but many users can forward only when they’re unavailable.
How do I turn off call forwarding on Nex-Tech Wireless?
You can disable call forwarding using the same method you used to enable it—either turn it off in your phone’s call settings or use the carrier’s deactivation dial codes. After turning it off, calls should return to ringing your Nex-Tech Wireless phone normally.

Call forwarding codes for other carriers

See the full list of call forwarding codes by carrier.

Ready to forward your Nex-Tech Wireless calls?

Set up SkipCalls in minutes. Your AI receptionist answers every call 24/7 — no missed leads, no voicemail tag.

Download on the App StoreGet it on Google PlaySTART ONWeb App

Want the exact dialer string? Use the call forwarding code generator.